Соединения для пара DINBO

Соединения для пара DINBO

STANDARD

DINBO couplings have been developed for use in steam applications up to 18 bar / 260 psi. The hose shank is designed in compliance with EN 14423 / DIN 2826 for assembly with RKS steam clamps complying with EN 14423 / DIN 2826.

OPERATION

The round head of the hose shank is designed to fit the ground joint coupling. The spud forms one half of the DINBO coupling and is usually permanently fixed to the equipment. The hose shank and wing nut are clamped to the hose using RKS steam clamps complying with EN 14423 / DIN 2826. The spud and hose shank are connected/disconnected by rotating the wing nut on the spud to achieve a mechanical and pressure connection. The rounded head of the hose shank contacts the bevelled polymer insert of the spud, creating a soft-to-hard polymer connection.

APPLICATION

DINBO couplings are commonly used for compressed air, water, liquid petroleum gas, fluid petroleum products, chemical, potable fluids and almost any other type of fluid or gas. They can be used with all types of rubber, synthetic, plastic, metal (with special stems) or semi-metal hoses.

N.B.: Steam is dangerous. Never use quick-release couplings for steam applications.

WORKING PRESSURE: 18 bar / 260 psi

TEMPERATURE: -51°C / -60°F up to 232°C / 450°F

Hose, coupling, assembly method and seal must be chosen in relation with the desired application and temperature range.

MATERIAL: Coupling Stainless steel AISI 316 - 1.4401 Zinc plated steel Bronze 2.10 90.01 G-CuSn7ZnPb

Seal: PTFE + 15% graphite